au.\*:("CRACIUN, Valentin")
Results 1 to 25 of 269
Selection :
Instabilities during the formation of electroactive polymer thin filmsLUO, Shyh-Chyang; CRACIUN, Valentin; DOUGLAS, Elliot P et al.Langmuir. 2005, Vol 21, Num 7, pp 2881-2886, issn 0743-7463, 6 p.Article
Proceedings of the European Materials Research Society 2005 - Symposium-J: Advances in Laser and Lamp Processing of Functional Materials, Strasbourg, France, May 31-3 June 2005REIF, Juergen; ZERGIOTI, Ioanna; CRACIUN, Valentin et al.Applied surface science. 2006, Vol 252, Num 13, issn 0169-4332, 600 p.Conference Proceedings
European Materials Research Society Fall Meeting 2013, Symposium B: Stress, structure and stoichiometry effects on the properties of nanomaterials IICRACIUN, Valentin; SANCHEZ, Florencio; PAUMIER, Fabien et al.Applied surface science. 2014, Vol 306, issn 0169-4332, 100 p.Conference Proceedings
Diagnostics of picosecond laser pulse absorption in preformed plasmaVOGEL, Nadja.Applied surface science. 2006, Vol 252, Num 13, pp 4850-4856, issn 0169-4332, 7 p.Conference Paper
Structural investigations of InZnO films grown by pulsed laser deposition techniqueCRACIUN, Doina; SOCOL, Gabriel; STEFAN, Nicolaie et al.Thin solid films. 2010, Vol 518, Num 16, pp 4564-4567, issn 0040-6090, 4 p.Conference Paper
The influence of ion bombardment on emission properties of carbon materialsCHEPUSOV, Alexander; KOMARSKIY, Alexander; KUZNETSOV, Vadim et al.Applied surface science. 2014, Vol 306, pp 94-97, issn 0169-4332, 4 p.Conference Paper
Advanced excimer-based crystallization systems for production solutionsSIMON, F; BRUNE, J; HERBST, L et al.Applied surface science. 2006, Vol 252, Num 13, pp 4402-4405, issn 0169-4332, 4 p.Conference Paper
Laser synthesis of nanostructures based on transition metal oxidesMULENKO, S. A; MYGASHKO, V. P.Applied surface science. 2006, Vol 252, Num 13, pp 4449-4452, issn 0169-4332, 4 p.Conference Paper
Effect of laser-remelting of surface cracks on microstructure and residual stresses in 12Ni maraging steelGRUM, J; SLABE, J. M.Applied surface science. 2006, Vol 252, Num 13, pp 4486-4492, issn 0169-4332, 7 p.Conference Paper
Multilayered metal oxide thin film gas sensors obtained by conventional and RF plasma-assisted laser ablationMITU, B; MAROTTA, V; ORLANDO, S et al.Applied surface science. 2006, Vol 252, Num 13, pp 4637-4641, issn 0169-4332, 5 p.Conference Paper
Property improvement of pulsed laser deposited boron carbide films by pulse shorteningCSAKO, T; BUDAI, J; SZÖRENYI, T et al.Applied surface science. 2006, Vol 252, Num 13, pp 4707-4711, issn 0169-4332, 5 p.Conference Paper
Pulsed laser deposited iron fluoride thin films for lithium-ion batteriesMAKIMURA, Yoshinari; ROUGIER, Aline; TARASCON, Jean-Marie et al.Applied surface science. 2006, Vol 252, Num 13, pp 4587-4592, issn 0169-4332, 6 p.Conference Paper
Surface temperature evolution in pulsed laser action of millisecond rangeDOUBENSKAIA, M; SMUROV, I.Applied surface science. 2006, Vol 252, Num 13, pp 4472-4476, issn 0169-4332, 5 p.Conference Paper
Synthesis of nanoclusters by nanosecond laser ablation : Direct simulation Monte Carlo modellingITINA, Tatiana E; SENTIS, Marc; MARINE, Wladimir et al.Applied surface science. 2006, Vol 252, Num 13, pp 4433-4438, issn 0169-4332, 6 p.Conference Paper
The influence of pulse duration on the stress levels in ablation of ceramics : A finite element studyVILA VERDE, A; RAMOS, Marta M. D.Applied surface science. 2006, Vol 252, Num 13, pp 4511-4515, issn 0169-4332, 5 p.Conference Paper
Waveguide structures written in SF57 glass with fs-laser pulses above the critical self-focusing thresholdDIEZ-BLANCO, V; SIEGEL, J; SOILS, J et al.Applied surface science. 2006, Vol 252, Num 13, pp 4523-4526, issn 0169-4332, 4 p.Conference Paper
Characterization of sol-gel derived TiO2/ZrO2 films and powders by Raman spectroscopyNAUMENKO, A; GNATIUK, Iu; SMIRNOVA, N et al.Thin solid films. 2012, Vol 520, Num 14, pp 4541-4546, issn 0040-6090, 6 p.Conference Paper
Correlation between strain and the metal-insulator transition in epitaxial V2O3 thin films grown by Molecular Beam EpitaxyDILLEMANS, L; LIETEN, R. R; MENGHINI, M et al.Thin solid films. 2012, Vol 520, Num 14, pp 4730-4733, issn 0040-6090, 4 p.Conference Paper
Defect generation during silicon oxidation: A Kinetic Monte Carlo studyALI-MESSAOUD, A; CHIKOUCHE, A; ESTEVE, A et al.Thin solid films. 2012, Vol 520, Num 14, pp 4734-4740, issn 0040-6090, 7 p.Conference Paper
Electronic structure and formation mechanism of complex Ti-Nb oxideKHOVIV, D. A; ZAYTSEV, S. V; IEVLEV, V. M et al.Thin solid films. 2012, Vol 520, Num 14, pp 4797-4799, issn 0040-6090, 3 p.Conference Paper
Fabrication and characterization of nanoporous ZnO layers for sensing applicationsWAGNER, Alexander; BAKIN, Andrey; OTTO, Torsten et al.Thin solid films. 2012, Vol 520, Num 14, pp 4662-4665, issn 0040-6090, 4 p.Conference Paper
High quality epitaxial ZnO films grown on solid-phase crystallized buffer layersKUWAHARA, Kazunari; ITAGAKI, Naho; NAKAHARA, Kenta et al.Thin solid films. 2012, Vol 520, Num 14, pp 4674-4677, issn 0040-6090, 4 p.Conference Paper
Introduction of zirconium oxide in a hardmask concept for highly selective patterning of scaled high aspect ratio trenches in siliconPAUL, Jan; RIEDEL, Stefan; RUDOLPH, Matthias et al.Thin solid films. 2012, Vol 520, Num 14, pp 4527-4531, issn 0040-6090, 5 p.Conference Paper
Molecular beam epitaxy growth of BaTiO3 thin films and crucial impact of oxygen content conditions on the electrical characteristicsNIU, G; GAUTIER, B; YIN, S et al.Thin solid films. 2012, Vol 520, Num 14, pp 4595-4599, issn 0040-6090, 5 p.Conference Paper
Optical properties and band gap characterization of high dielectric constant oxidesFURSENKO, O; BAUER, J; LUPINA, G et al.Thin solid films. 2012, Vol 520, Num 14, pp 4532-4535, issn 0040-6090, 4 p.Conference Paper